Road bitumen supplier on the market
Asphalt is generally divided into three categories: asphalt, cold and protective, which we will briefly explain about each of them. Sand is a coating material and adhesive (bitumen) and a filler between sand (filler) that is mixed by special machines with a certain amount of composition. Asphalt is classified into two types in terms of type: hot asphalt and cold asphalt. In cold asphalt production, sand materials are mixed with bitumen and loaded for use. For more information about Road bitumen supplier on the market, visit our site.
Is bitumen crude oil?
Hot asphalt is the type of asphalt that is mixed with bitumen in hot form and is spread evenly and compacted on hot surface. Hot asphalt is a mixture of several different materials, including stone materials such as sand and the main material, namely bitumen, which is made in the factory based on the type of bitumen used at a temperature between 105 to 163 degrees Celsius and is sent to the desired area. This material is spread on the area in the form of hot paste and is beaten and pressed with special devices. After cooling, they become solid and very resistant.
Cold asphalts are a mixture of rock materials with bitumen (soluble bitumen, emulsion). The mixing of bitumen and materials is done at ambient temperature and is spread and compacted at the same temperature. Aggregates can be wet when mixed with bitumen, but for soluble bitumen, the moisture content of the material must be dried at room temperature or under heat.
Cold asphalt mixtures prepared with concentrated soluble bitumens such as MC-3000 or SC-3000. Practically, like hot asphalt, they must be mixed with bitumen at 95 ° C or higher and spread and compacted within the same temperature range. Cold asphalt can be transported and spread over long distances or stored in a workshop and used later.
Isogum, commonly referred to as bitumen or asphalt, is an organic, natural mixture of liquids that are black, viscous, and highly viscous. There are two main types of bitumen: raw or natural, or refined.
Crude or natural bitumen is a viscous crude oil that is also very thick and heavy. For this reason, only with the help of heat can it flow like liquids. This substance is like cold juice or molasses when it is at room temperature.
On the other hand, refined bitumen is the remaining part of crude oil, which is obtained from cross-sectional distillation of crude oil. This type of bitumen has the highest boiling point which is 525 degrees Celsius and is also known as the heaviest type.
Bitumen is made up of the remnants of microscopic organisms, early and ancient algae, and a number of other types of living organisms. When these creatures died and perished, their remains were added to the sediments on the seabed. Due to the excessive pressure and heat under the earth’s crust, these residues turned into materials such as crude oil and bitumen.
It is also possible that some types of bitumen are one of the main materials of the earth that were produced during the formation of the earth, and therefore these materials are exposed to a type of bacteria that feeds on hydrocarbons. And this is because some bitumen is found in igneous rocks like meteorites. For more information about bitumen price per ton visit our website.
Bulk supplier of road bitumen
bitumen sellers use this material mainly in the construction and road industries to cover the surface of roads. Also, another use of bitumen is to produce waterproof and bitumen insulation products that are used on the roof of the building. In ancient times, bitumen was also used to build boats and to waterproof them. This material was also used in the building along with a certain amount of other materials. Since our production line is one of the Bulk supplier of road bitumen, we export this product to other countries as well.